Consisting of a port to insert the MINI-PAM/F Fiberoptics and a clip to hold the sample. A circular 1 cm diameter hole in the upper clip part defines the measuring area. Standard distance between fiberoptics tip and measuring area is 8 mm. The port aligns the fiberoptics at an angle of 60° relative to the measuring plane. A mini quantum sensor is positioned on the sample level by a movable Perspex arm, a leaf temperature sensor is mounted below the sample within an up and down movable Plexiglas tube, and a humidity sensor is mounted at 3 cm distance from the sample. The electronics of the 2035-B unit store calibration factors of sensors. Saturation pulses can be triggered by remote trigger button. An input socket for an additional light sensor is provided
Mini quantum sensor
Sensor for selective PAR measurement with the spectral properties of the LS-C sensor, range 0 to 7000 μmol m-2 s-1, cosine-corrected for light incident at angles between -30° to +30° from surface normal
Thermocouple
Ni-CrNi, wire diameter 0.1 mm, -20 to +60 °C
Humidity sensor
Humidity and temperature sensing integrated circuit, 0 - 100% relative humidity