Specifications for FIBER Version DUAL-PAM-100

All specifications are subject to change without prior notice.

Power-and-Control-Unit DUAL-PAM/F

General design: Microcontroller: 2 x AVR-RISC (8 MHz) + 4 MB SRAM; 256 000 data points with 12 bit resolution can be stored

Measuring light: P700-dual-wavelength-emitter: Sample wavelength 830 nm, reference wavelength 870 nm. Fluorescence emitter: 620 nm

Actinic red light: Far-red LED lamp: 720 nm. Chip-on-board (COB) LED array: 635 nm for continuous actinic illumination, maximum 4000 μmol m-2 s-1 PAR. Saturating single turnover flashes, maximal 200 000 μmol m-2 s-1 PAR, adjustable between 5 and 50 μs. Multiple turnover flashes, maximal 20 000 μmol m-2 s-1 PAR, adjustable between 1 and 1000 ms.

Actinic blue light: Blue LED lamp: 460 nm for continuous actinic illumination, maximal 500
μmol m-2 s-1 PAR.

Signal detection: PIN photodiode with special pulse preamplifier for measuring P700 and fluorescence changes with maximal time resolution of 10 μs

Communication: PC interface: USB 1.1, 2.0 and 3.0 compatible

User interface: Windows computer with DualPAM software

Power supply: Rechargeable sealed lead-acid battery 12 V/2 Ah; Battery Charger MINIPAM/L (100 to 240 V AC)

Power consumption: During basic operation 160 mA

Sockets: AUX (for Leaf Clip 2030-B or Cosine-Corrected Mini Quantum Sensor US-MQS/WB), USB (for USB cable), TRIGGER IN (input for 5 V rectangular signals to trigger fast kinetics externally), TRIGGER OUT (output of 5 V rectangular signals to trigger external devices), 2 EXT. SIGNALS (input for external DC signals. Range 0 - 1V or 0 - 5 V), and CHARGE (for MINI-PAM/L charger).

Dimensions: 31 cm x 16 cm x 33.5 cm (W x H x D), with carrying handle

Weight: 4.5 kg

Special Fiberoptics 2010-F

Design: Flexible, steel-spiral, plastic-covered bundle with three-pin optical connector

Joint end (measuring site): Active diameter 6 mm, outer diameter 8 mm

Length: 100 cm

Weight: 300 g

Transport Box Phyto-T

Design: Aluminum box with custom foam packing for DUAL-PAM-100 and accessories

Dimensions: 60 cm x 40 cm x 25 cm (L x W x H)

Weight: 5 kg

Computer Requirements

1 free USB socket; 500 or more MB RAM; operating system: Microsoft Windows XP/Vista/7/8/10


Suspension Cuvette KS-2500 and Stirrer MKS-2500

Cuvette: Round stainless steel cuvette (7.5 mm wide, 9.0 mm deep) with top window adapter for connecting the fiberoptics; embedded in PVC body with injection port for Hamilton syringes and hose nozzles for connecting an external flow-through water bath (not included). Including three 6.0 x 1.5 mm magnetic stir bars

Magnetic stirrer: To drive the magnetic stir bar in the Suspension Cuvette KS-2500; with PVC ring for centering the cuvette and miniature stand to fix the fiberoptics on top of the cuvette

Arabidopsis Leaf Holder DUAL-BA

Design: Tube-shaped fiber tip holder composed of polyoxymethylene (POM; 4.5 cm x 2.5 cm, L x D max,) with recessed permanent neodymium magnet. Spring steel band (0.3 mm thick, 1.5 cm wide) consisting of two arms (2 cm and 5 cm, respectively) which form a right angle. The leaf is positioned between the 2 cm arm and the fiber optics tip. The 5 cm arm is attached to the fiber tip holder by the magnet. The 5 cm arm runs in a slit guide. Including a stand with fiberoptics guide