Specifications for DIVING-PAM-II Accessories

All specifications are subject to change without prior notice.

Universal Sample Holder DIVING-II-USH

Design: Plexiglas bar (15 cm x 4.5 cm) with upward curved end possessing a port for positioning at 60° or 90° relative to the sample level the DIVING-PAM-II fiber optics. Mounted to the curved end is a 5.5 cm x 7.5 cm (W x H) sample clip consisting of a Plexiglas plate (lower part) and an aluminum frame open to the top (upper part). Featuring a 10 cm long plastic grip with button for triggering measurements via a 1.5 m trigger cable. Including a 1 m long tubular net with zipper to keep together trigger cable and fiber optics. With holder to for spectrometer MINI-SPEC

Dimensions: 25 cm x 4.5 cm x 21 cm (L x W x H)

Weight: 380 g

Underwater Oxygen Sensor DIVING-PAM-II/O2

Design: POM tube, at one end face, optical sensor spot fixed by a Perspex disk with central hole and PT100 resistance thermometer, at the other end face, 4-pole underwater socket. Temperature-compensated oxygen measurement by a high precision optical oxygen meter connected to the sensor spot by fiberoptics. Including a 2 m underwater cable 000130204945, two spare oxygen sensor spots OXSP5, and a holder (weight 75 g, maximum dimensions 6.5 cm x 6 cm x 12 cm, L x W x H) to attach both the DIVING-PAM-II/O2 and the spectrometer MINI-SPEC to the DIVING-PAM-II optoelectronic unit, consisting of the mounting brackets 000246001714 and 000246003914 and 2 ring holders 000244905514.

Maximum diving depth: 50 m

Dimensions: 3.25 cm diameter, 17.5 cm length

Weight: 135 g

Magnet Sample Holder DIVING-MLC

Design: Two plastic halves with magnets, one with sliding shutter made of spring steel and seat for the adapter DIVING-DA. The other halve with seats for additional magnets. Inner sides of both halves covered with black fabric. Including 4 additional magnets.

Dimensions: Diameter 30 mm, height 28 mm

Weight: 10 g

Underwater Cable DIVING-II/K25

Dimensions: 25 m length, 6 mm diameter

Weight: 1.25 kg

Surface Holder DIVING-SH

Design: Holder made of grey PVC, equipped with 3 rubber bands and hooks to be attached to creviced surface (e.g. of coral); nylon screws for distance adjustment

Dimensions: 6 cm x 6 cm x 2.5 cm (L x W x H)

Weight: 95 g

Underwater Cable DIVING-II/K50

Dimensions: 50 m length, 6 mm diameter

Weight: 2.5 kg

Including charger DIVING-II/L15: Input: 100 V to 240 V AC, 50 to 60 Hz. Output: 15 V DC, 4.65 A. Operating temperature: -5 to +45 °C, (non-condensing). Dimensions: 13 cm x 5.5 cm x 3 cm (L x W x H). Weight: 350 g including cables